192.168.0.1 is a private IP address that is used broadly by routers as a default IP address. As is standard used by most manufacturers, there is a good chance of conflicts. This is due to the fact that multiple network devices such as routers from the same manufacturer are associated with a corresponding network. This IP address is located in certain address ranges that can be used as a private Internet.

Just bring one end of the Ethernet cable to one of several ports on the back of the router and other network the end of the slot on your PC and reboot.

Any system connected to the Internet is identified by a unique IP address. This address is a must in order to connect .. There are many addresses that are in the range of 192.168.0.1 to 192.168.255.255.

When configuring the settings, it is important to have a username and password to authenticate a user. If you to configure it for the first time, the manufacturer is already a user name and password to enter the configuration. It’s yours, if you do not want to change the password or. Make sure you remember; If not, write for registration purposes.

To explain in more detail what is 192.168.1.1, you need to understand what an IP address. An IP address is essentially a sequence of numbers that form a part of a network ID. It’s like a home address, information everywhere, it can be sent correctly, because the address be identifiable. The IP 192.168.1.1 is actually a private IP address that can be used over the network, but will not be identifiable outside the network. In other words, if you are 192.168.1.1 used for your computer at home and at work, the IP, it will not be a problem. However, if you have two network devices on the same network, a collision may occur problem. Therefore, you need to use a local network device with this IP address at a time.

You should get Netgear router support, so you can easily configure. You must remember to keep many important things if you want to configure your router. But you do not worry about it. Here we will do a simple adaptation of the Netgear router. The main requirement to configure the Netgear router is that you made an Internet connection and configuration information from your ISP available if you need to sign their service. You must also configure a few information about your Netgear router as a host and domain names, domain name server addresses, static IP addresses, user names and Internet connection password.

Note: For more information, contact the router manufacturer. They often have a toll free number and go through exactly how to do what you want. I suggest a DLink router because it 24/7 support and are very helpful.